Table of Contents
Advertisement
Diskette Drive A
Determines the type of Diskette Drive A.
PS/2 Mouse Function
Determines the PS/2 Mouse function is enabled or disabled.
On Board LAN
Determines the on board Lan function to be enabled or disabled.
Serial Port Setup
Determines the I/O port address and Interrupt Request Number of
serial port.
Parallel Port Setup
Determines the I/O port address and Interrupt Request Number of
parallel port
USB Setup
The options in this menu item are used to enable the USB(Universal
Serial Bus) functions
IDE Drives Setup
IDE devices drive controllers can support up to two separate drives.
These drives have a master/slave relationship which are determined
by the cabling configuration used to attach them to the controller, Your
system supports two IDE controllers- a primary and a secondary-- so
you have the ability to install up yo four separate IDE drives.
PIO means Programmed Iuput/Output. Rather than have the BIOS
issue a series of commands to effect a transfer to or form the disk
1-19
Advertisement
Table of Contents
