IBM Aptiva 2165 Hardware Maintenance Service page 10

To Connect
1.
Turn Everything OFF.
2.
First, attach all cables to devices.
3.
Attach signal cables to receptacles. 3. Remove signal cables from
4.
Attach power cord(s) to outlet.
5.
Turn device ON
NOTE: In the UK, by law, the
telephone cable must be connected
after the power cord.
VI
To Disconnect
1. Turn Everything OFF.
2. First, remove power cord(s) from
outlet
receptacles.
4. Remove all cables from devices.
NOTE: In the UK, the power cord
must be disconnected after the
telephone cable.