Table of Contents
Advertisement
Reversing the Door Swing – Optional
Tools needed:
§ #2 Phillips head screwdriver
§ Flat-head screwdriver
§ Awl
§ Gloves
§ Safety glasses
1. Turn power OFF (and, if applicable, disconnect the battery
backup) prior to reversing door swing.
2. Remove kick panel* and disconnect reed switch where
applicable (Fig. 6).
* If the unit has a keypad lock, the door must be open to remove the kick panel.
3. Find the control module on the left-hand side of the unit, just to
the left of the condenser.
4. Remove the thumb nut (Fig. 7.1) on the bottom front of the
control module (Fig. 7.2).
5. Pull control module forward 1 inch, rotate left as per Fig. 8, and
continue to pull the control module forward.
REF4P, REF5P and REF5BBP-T Undercounter Refrigerators
Fig. 6
Fig. 7
2
Fig. 8
1
2
1
7
Advertisement
Table of Contents
