Confirmations Upon Delivery; Checks; Nameplate Information - YASKAWA G7 Series Technical Manual

Confirmations upon Delivery

Checks

Check the following items as soon as the Drive is delivered.
Item
Has the correct model of Drive been
delivered?
Is the Drive damaged in any way?
Are any screws or other components
loose?
If you find any irregularities in the above items, contact the agency from which you purchased the Drive or
your Yaskawa representative immediately.

Nameplate Information

There is a nameplate attached to the side of each Drive. The nameplate shows the model number, specifica-
tions, lot number, serial number, and other information on the Drive.
Example Nameplate
The following nameplate is an example for a standard Drive: 3-phase, 200-240Vac, 0.4kW, IEC IP20 and
NEMA 1 standards.
Drive model
Input specifications Input specifications
Output
specifications
Lot number
Serial number
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 1.2 Checks
Check the model number on the nameplate on the side of the Drive.
Inspect the entire exterior of the Drive to see if there are any scratches or
other damage resulting from shipping.
Use a screwdriver or other tools to check for tightness.
G U
Fig 1.1 Nameplate

Confirmations upon Delivery

Method
Drive
specifications
Mass
3
1-