Table of Contents
Advertisement
Changing the Bluetooth name:
1) While viewing the Bluetooth Management Page, press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to place the cursor in the 'BLUETOOTH NAME' field.
3) Enter the desired name by using the large FMS Knob to select the character field, and the small FMS Knob
select the desired alphanumeric character for that field.
4) Press the ENT Key. The cursor is removed and the new name is displayed.
Enabling/Disabling Flight Plan importing from Garmin Pilot or other compatible application:
1) While viewing the Bluetooth Management Page, press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to place the cursor in the 'FLIGHT PLAN IMPORT' field.
3) Turn the small FMS Knob to select 'ENABLED' or 'DISABLED'.
4) Press the FMS Knob to remove the cursor.
Enabling/Disabling automatic reconnection of a specific paired device:
1) While viewing the Bluetooth Management Page, press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to highlight the desired paired device.
3) Turn the small FMS Knob to select 'ENABLED' or 'DISABLED'. Selecting 'ENABLED' allows the G1000 to
automatically connect to a previously paired device when detected.
4) Press the FMS Knob to remove the cursor.
Removing a specific paired device from the list of paired devices:
1) While viewing the Bluetooth Management Page, press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to highlight the desired paired device.
3) Press the REMOVE Softkey. A confirmation screen is displayed as seen in Figure 8-139.
4) If necessary, turn the large FMS Knob to select 'YES'.
5) Press the ENT Key to remove the device from the list of paired devices.
190-00820-11 Rev. A
Figure 8-139 Device Removal Confirmation
Pilot's Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
ADDITIONAL FEATURES
663
Advertisement
Table of Contents
