Digi Link; The Digi Link Functions On Your Television - Grundig 22 VLE 8220 SG Manual

operAtion­usinG­externAl­DeviCes
DiGi­linK
Your television is equipped with
the DIGI LINK function.
This function uses the CEC
(Consumer Electronics Control)
protocol.
CEC allows external devices which are connect-
» «
ed to the hDmi sockets by an HDMI cable
(e.g. DVD player) to be operated with a remote
control.
Prerequisite is that the devices connected support
CEC. Read the operating manual for the external
device to find out how to activate the correspond-
ing function.
the­DiGi­linK­functions­on­your­
television
switching­on­the­television­­
automatically­from­standby
»
If the Autom. switch-on TV
» «
( On ), then once the external device (e.g.
DVD player) is switched on, the television also
switches on and the appropriate HDMI preset is
selected.
Automatic­selection­of­the­hDmi­
preset­on­the­television
If your television is switched on and you then
switch on the external device (e.g. DVD player),
the appropriate HDMI preset on the television
will be selected.
selecting­the­menu­language
The television menu language is automatically
s elected on the external device (e.g. DVD player).
The external device must support this function.
switching­off­the­external­device­
automatically
If you switch your television to standby, the ex-
ternal device (if it is switched on) will also be
switched to standby.
DIGI LINK is always active on your television set.
«
function is activated
searching­for­and­activating­­
external­devices
You can connect up to 11 devices with DIGI LINK
functions to your television.
1 Open the menu with
Use »C« »D«
2 or
«
Setup menu and confirm with
» «
– Source Setup
Select »
3
DIGILINK DEVICE SELECTION
menu and confirm with
»
– HDMI CEC Device List
displayed.
4 Start the device search with
– T he devices found are displayed in the
menu.
5­
Select the device for operation with
B A
»D« » « »
, or
it.
– I f the selected device is connected to a
different input to the current one, a switch
to the respective input will occur auto-
matically.
»m«
6 Press
to end the setting.
­-----------------------------
»m«
.
»
button to open Source
» «
oK
.
menu will be displayed.
» «
oK
.
«
menu will be
» «
(red).
●
« » «
oK
and press to mark
ENGLISH
«
»C«
,
­ 3 7