Configure Your Device; Basic Settings; Adjust The Image - Axis M3057-PLR Mk II User Manual

Hide thumbs Also See for M3057-PLR Mk II:

Table of Contents

M3057-PLR Mk II Dome Camera

Configure your device

This section includes instructions about configuring your device. If you want to learn more about how certain features work, go

to Learn more on page 45.

Rotate the image with digital roll

Note

If you rotate the image, all views are affected.

To rotate the 360° view, go to Video > Installation and use the Roll slider.

You can also enter a value for the roll angle in the text field.

Configure the quad view

Note

Quad view is available in these mounting positions:

• Desk

• Ceiling

1. Click

2. Select Quad view among the live feed sources.

3. Go to Settings > System > Orientation and click

4. To change the view order, drag and drop the yellow boxes.

Level the camera

To adjust the view in relation to a reference area or an object, use the level grid in combination with a mechanical adjustment

of the camera.

1. Go to Video > Image > and click

2. Click

3. Adjust the camera mechanically until the position of the reference area or the object is aligned with the level grid.

Reduce image processing time with low latency mode

You can optimize the image processing time of your live stream by turning on low latency mode. The latency in your live stream is

reduced to a minimum.

1. Go to System > Plain config.

2. Select ImageSource from the drop-down list.

and select Legacy device interface.

to show the level grid.

Table of Contents