Video - Axis M3057-PLR Mk II User Manual

Hide thumbs Also See for M3057-PLR Mk II:
Table of Contents

Advertisement

M3057-PLR Mk II Dome Camera
The device interface
Recordings: Shows each ongoing recording and its source. For more information, see Recordings on page 25
Shows the storage space where the recording is saved.
Device info
Shows device information, including firmware version and serial number.
Upgrade firmware: Click to go to the Maintenance page where you can do a firmware upgrade.
Connected clients
View details: Click to show all clients that are connected to the device.

Video

Click to play the live video stream.
Click to freeze the live video stream.
Click to take a snapshot of the live video stream. The file is saved in the 'Downloads' folder on your computer. The image
file name is [snapshot_YYYY_MM_DD_HH_MM_SS.jpg]. The size of the snapshot depends on the compression that is applied
from the specific web-browser engine where the snapshot is received, therefore, the snapshot size may vary from the actual
compression setting that is configured in the device.
Click to show I/O output ports. Use the switch to open or close the circuit of a port, for example to test external
devices.
Click to manually turn on or turn off the IR illumination.
Click to manually turn on or turn off the white light.
Click to access onscreen controls:
• Predefined controls: Turn on to use the available onscreen controls.
• Custom controls: Click
Starts the washer. When the sequence starts, the camera moves to the configured position to receive the wash
spray. When the whole wash sequence is completed, the camera returns to its previous position. This icon is only visible when the
washer is connected and configured.
Starts the wiper.
that specific pan/tilt range. When you have set a focus recall area and the camera enters that area in the live view, the camera
recalls the previously saved focus. It's enough to cover half of the area for the camera to recall the focus.
Add custom control to add an onscreen control.
Adds or removes a focus recall area. When you add a focus recall area, the camera saves the focus settings at
17

Advertisement

Table of Contents
loading

Table of Contents