Bird Deterrents (Option); Snow Cover Kit (Option); Wiring With Other Equipment - Furuno SATELLITE COMPASS SCX20 Operator's Manual

1. INSTALLATION
1.6

Bird Deterrents (Option)

The optional bird deterrents (OP20-54) can help
keep birds from resting on your antenna.
Remove the double-sided tape from two bird deter-
rents, then attach the deterrents to the antenna cov-
er. Coat around the contact area of both bird
deterrents with the supplied adhesive.
1.7

Snow Cover Kit (Option)

The optional Snow Cover Kit (OP20-53) is available to reduce snow build-up on your
antenna.
To install this kit, see the instructions (C72-01901) supplied with the kit.
1.8

Wiring with Other Equipment

Using the supplied cable assembly, connect the antenna cable of this equipment to
the NMEA 2000 network backbone. Refer to "SYSTEM CONFIGURATION" on
page vi for details.
This equipment connects to the devices in an NMEA 2000 network.
• This equipment: 4 LEN at 9 V
• Connect equipment to the backbone with T-type connectors.
• Terminators are required for both ends of the backbone cable.
• We recommended that power from the NMEA 2000 network be input at the center
of the backbone.
What is NMEA 2000 (CAN) bus?
CAN bus is a communication protocol (NMEA 2000 compliant) that shares multiple
data and signals through a single backbone cable. You can simply connect any CAN
bus devices onto the backbone cable to expand your network on-board. With CAN
bus, IDs are assigned to all the devices in the network, and the status of each sensor
in the network can be detected. All the CAN bus devices can be incorporated into the
CAN bus network. For detailed information about CAN bus wiring, see "Furuno CAN
bus Network Design Guide" (Type: TIE-00170).
1-14
Bird
deterrent
Antenna cover Antenna cover