Viewing Planesync™ Data; Flying Activity; Starting A Flight - Garmin D2 MACH 1 Owner's Manual

Viewing PLANESYNC
This watch is not intended to provide primary flight information and is to be used for supplemental purposes
only.
When you connect your watch, a compatible GDL
.com account, you can view avionics data on your watch. Go to
compatible devices.
1 From the watch face, press UP or DOWN to view the PLANESYNC glance.
2 Press START.
3 If this is the first time you are viewing the glance, select Select Aircraft to connect to an aircraft in your
flyGarmin.com account.
4 Select an option:
• Press DOWN to view the aircraft status, location, and sensor data.
• Press START, and select Remote Status to refresh the connection to the aircraft.
• Press START, and select Select Aircraft to connect to a different aircraft.

Flying Activity

A flying activity starts automatically when your detected climb rate exceeds the value you set in the auto fly
settings. The default auto fly value is 500 fpm.

Starting a Flight

1 From the watch face, press START.
2 Select Fly.
3 Go outside and wait while the watch locates satellites.
4 Press START to start the flight timer.
NOTE: Your activity data is recorded only while the flight timer is running. You can edit the activity settings
to start the Fly activity and the flight timer automatically at specified thresholds
page 47).
5 Start your activity.
6 After you complete your activity, press STOP, and select Save.
10
Data
™
WARNING
® 60 portable receiver, and an aircraft to your
buy.garmin.com for more information about
(Activities and App Settings,
flyGarmin
Flying