Appendix A: Ping Ip Address - Planet Networking & Communication ICA-8200 User Manual

2 Mega-pixel PoE / Wireless Fish-Eye IP Camera
ICA-8200/ICA-W8200

Appendix A: Ping IP Address

The Ping (stands for Packet Internet Groper) command is used to detect whether a specific IP
address is accessible by sending a packet to the specific address and waiting for a reply. It's
also a very useful tool to confirm the installation of Internet camera, or if the IP address
conflicts with any other device over the network.
If you want to make sure the IP address of Internet camera is right, utilize the Ping command
as follows:
Start a DOS window.
Type ping x.x.x.x, where x.x.x.x is the IP address of the Internet camera.
The replies, as illustrated below, will provide an explanation to the problem.
If you want to detect any other device that conflicts with the IP address of Internet camera, you
also can utilize the Ping command but you must disconnect the Internet camera from the
network first.
58