Time Tab - Planet Networking & Communication ICA-8200 User Manual

3.4.2 Time Tab

The Time tabbed pane is where you set up the clock of your Camera to synchronize with your
local time. Where:
System Time
Time Zone
Automatic
Keep Current Date
and Time
Set Manually
Enable Daylight
Saving
2 Mega-pixel PoE / Wireless Fish-Eye IP Camera
The Network camera current date and time is applied and displayed
here based on the setup status of the System Time Settings as
detailed below.
Select the applicable Time Zone of your city in reference to
Greenwich Mean Time.
Select this item if you want to automatically synchronize the camera
clock with that of Network Time Protocol (NTP) Server.
Select this option in lieu of automatic synchronization if the camera
is not connected to NTP Server and uses its own embedded clock.
Synchronize with the PC Time: Select this option to manually
synchronize the Network Camera clock (date and time) with that of
the local host computer.
Assign value: Select this option to enter the date and time
manually.
Select this option only when applicable at your location. Two setup
settings; the Start time and End time are needed to implement the
feature.
34
ICA-8200/ICA-W8200