Epson PowerLite EBL630U User Manual page 65

3. Select the Network menu and press
4. Select Network Settings and press
5. Select Projector Name and enter a name up to 16 alphanumeric characters long to identify the
projector on a network.
6. Set the Priority Control Interface setting to Wired LAN.
7. Select the Wired LAN menu and press
8. Select IP Settings and press
9. Select your IP settings as necessary:
• If your network assigns addresses automatically, turn on the DHCP setting.
• If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet
Mask, and Gateway Address as needed.
Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on
the remote control. To select a highlighted number, press
Num button on the remote control while entering the desired numbers.
Enter.
Enter.
Enter.
Enter.
65
Enter. Alternatively, press and hold the