Epson PowerLite EBL630U User Manual page 257

Setting
Projector ID
HDMI Out Setting (PowerLite
EB-L530U/EB-L630U/EB-
L630SU/EB-L635SU/EB-
L730U/EB-L735U)
Number of Projectors
(PowerLite EB-L530U/EB-
L630U/EB-L630SU/EB-
L635SU/EB-L730U/EB-L735U)
Order (PowerLite EB-
L530U/EB-L630U/EB-
L630SU/EB-L635SU/EB-
L730U/EB-L735U)
Tiling
Options
Off
1 through 9
Pass Through
Off
2 to 4
1 to 4 (when HDMI Out Setting
is set to Pass Through)
1 or 2 (when HDMI Out Setting
is set to Process Out)
Layout
Location Setup
257
Description
Assigns an ID for the projector when
you use multiple projectors
Set to Pass Through to enable up
to four projectors connected via
HDMI cables to project a unified
image.
Sets the number of projectors used
to create a unified image; this
setting is displayed only if HDMI
Out Setting is set to Pass Through
Sets the projector's position in
numbered order from left to right
Sets the number of split screens
and the position of each image; this
setting is only displayed when the
HDMI Out Setting is set to Off.