Epson PowerLite EBL630U User Manual page 235

Setting
Source
EDID
A/V Output
Audio Output
HDMI Audio Output
Options
Signal Format
Overscan
HDMI IN EQ Level
HDMI Out Intensity
Reset to Defaults
HDMI1
HDMI2
HDBaseT
While Projecting
Always On
Auto
Audio1
Audio2
HDMI1 Audio Output
HDMI2 Audio Output
235
Description
Displays settings selected for the current
input source
Signal Format: sets the video range for
certain input sources to match the setting of
an input source
Overscan: changes the projected image
ratio to make the edges visible by a
selectable percentage or automatically
when projecting a component signal
HDMI IN EQ Level: adjusts the HDMI input
signal for each HDMI port; change the level
if there is interference in the signal or there
is no projected image
HDMI Out Intensity: adjusts the signal
intensity from the HDMI ports; change if the
HDMI image does not display correctly (not
available on the PowerLite EB-L520U)
Reset to Defaults: resets all settings for
the current input source
EDID: describes the display capabilities of
your projector when the selected input
source is HDMI; change this setting as
necessary according to the resolution of the
current input source
Determines when the projector outputs
audio and images to external devices; set
to Always On to output audio and images
when the projector is in standby mode
Sets the audio input port when projecting
from input sources other than HDMI, LAN,
and Screen Mirroring
Sets the audio input port when projecting
from one of the HDMI ports