Updating Projector Firmware Using A Computer And Usb Cable - Epson PowerLite EBL630U User Manual

While the firmware is updating, all of the status indicators on the projector start flashing. After the update
is complete, the projector enters standby mode. If the Direct Power On setting is enabled, the projector
restarts automatically.
After the update is complete, check the Version setting in the Management > Information menu to
confirm that the firmware was updated successfully.
Parent topic: Updating the Firmware
Related references
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Initial Settings and Reset Options - Initial/All Settings Menu
Administration Settings - Management Menu
Related tasks
Connecting to a USB Device

Updating Projector Firmware Using a Computer and USB Cable

You can update the projector firmware using a computer and a USB cable.
Note: You need a USB Type A to USB Type B cable.
Your computer must be running one of the following operating systems when updating firmware:
• Windows 8.1 (32- and 64-bit)
• Windows 10 (32- and 64-bit)
• macOS 10.13.x (64-bit)
• macOS 10.14.x (64-bit)
• macOS 10.15.x (64-bit)
• macOS 11.x (64-bit)
1. Download the projector firmware file from the Epson support website. Make sure it is the correct
firmware file for your model.
2. Turn on the projector.
3. Connect the USB cable to the computer's USB port and to the projector's Service port.
4. Press the Menu button, select Initial/All Settings > Firmware Update and press Enter.
276