- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch off the tumble dryer
during an update. Otherwise, the
update will be aborted and will not be
installed.
- Some software updates can only be
carried out by a Miele service
technician.
Switching on/Switching off
The RemoteUpdate function is
activated as standard. Available
updates will be downloaded
automatically but will only be installed if
you initiate the installation manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.
Options
= Off
= On (factory default)
Starting the update
After the tumble dryer is switched on,
appears in the time display.
Touch the Start/Add laundry sensor.
starts to flash in the time display.
The update starts.
Bars in the time display show the
progress of the update:
= 0%
= 100%
Programmable functions
Postponing the update
After the tumble dryer is switched on,
appears in the time display.
Touch the sensor.
The next time you switch on the
appliance, you will be prompted to start
the update again.
87