Table of Contents
Advertisement
Quick Links
Installation
Front view
a Mains connection cable
b Control panel
c Condensed water container
– empty after every drying cycle
d Door
– do not open during drying
11692290-02
e Heat exchanger access panel
– do not open during drying
f Four height adjustable screw feet
g Cool air intake grille
– do not obstruct with a laundry bas-
ket or other objects
h Hose for external drainage of con-
densed water
Advertisement
Table of Contents
Related Manuals for Miele EcoSpeed TWD440 WP
Summary of Contents for Miele EcoSpeed TWD440 WP
- Page 1 *INSTALLATION* 11692290-02 Installation Front view a Mains connection cable e Heat exchanger access panel – do not open during drying b Control panel f Four height adjustable screw feet c Condensed water container g Cool air intake grille – empty after every drying cycle –...
- Page 2 *INSTALLATION* 11692290-02 Installation Rear view If the tumble dryer is being transpor- ted on its side, it must be tipped onto its left or right side. a Protruding lid for holding when mov- If the tumble dryer is being transpor- ing the tumble dryer (see arrows) ted upright and you are using a hand b Drain hose for condensation...
-
Page 3: Installation
- Air the room where the tumble dryer The tumble dryer must stand perfectly is located. level to ensure safe and proper opera- - Contact the Miele Customer Service tion. Department. Downtime after installation Damage to the tumble dryer by switching it on too soon. - Page 4 *INSTALLATION* 11692290-02 Installation Ventilation The heat pump that is essential to the operation of this tumble dryer The cool air intake at the front of the generates a great deal of heat inside tumble dryer must not be blocked or its casing.
-
Page 5: Additional Installation Requirements
Optional accessories – Washer-dryer stack The tumble dryer can be combined with a Miele washing machine in a washer- dryer stack. The appropriate Miele washer-dryer stacking kit is required. – Plinth The tumble dryer can be fitted on a... -
Page 6: External Condensed Water Outlet
*INSTALLATION* 11692290-02 Installation Installation conditions requiring a External condensed water out- non-return valve Danger of condensed water Note back-flow. When drying is in progress, con- Water could flow back into the densed water is pumped into the con- tumble dryer or be drawn into it. densed water container through the Back-flow water could damage the drain hose which is located at the... - Page 7 *INSTALLATION* 11692290-02 Installation Arranging the drain hose Examples Drainage into a sink or floor gully Damage to the drain hose through incorrect handling. Use the hose holder to secure the drain hose. The drain hose can suffer damage and leak. Do not pull on the drain hose and do not stretch it or allow it to become kinked.
- Page 8 *INSTALLATION* 11692290-02 Installation Fit adapter 1 to the sink drain outlet Direct connection to a sink drain outlet using nut 2. Use the hose holder, the adapter, the The nut is usually fitted with a washer hose clips and the non-return valve which must be removed.
-
Page 9: Changing The Door Hinging
*INSTALLATION* 11692290-02 Installation Hold the door securely and pull it for- Changing the door hinging wards: to remove the door you will You can change the door hinging on need to pull the base plate of the this tumble dryer yourself. hinge with its 2 pins out of the dryer. - Page 10 *INSTALLATION* 11692290-02 Installation Turn the door lock through 180°. Use a T20 Torx screwdriver to remove screw on the lock catch. Press the door lock into openings on the opposite side of the door Pull off the lock catch together with opening.
- Page 11 *INSTALLATION* 11692290-02 Installation 4. Dismantle the door hinge from the door The door hinge cover must be un- clipped from position and then re- moved. Insert the lock catch into the new cover supplied with the dryer. Place this new cover to one side for now.
- Page 12 *INSTALLATION* 11692290-02 Installation 5. Change over the door hinge on the Tip: In some circumstances, the rods door can be difficult to dislodge. Moving the screwdriver with a levering action while The door hinge is secured to the door pulling at the same time may help to with 2 angled rods.
- Page 13 *INSTALLATION* 11692290-02 Installation You now need the new door hinge cover supplied with the tumble dryer. Fit new door hinge cover and clip it into position. 6. Change the lock catch on the door You now need the new lock catch cover supplied with the dryer which you have already fitted with the lock catch.
- Page 14 *INSTALLATION* 11692290-02 Installation Refitting Now that you have changed the door hinging the door will open from 7. Refit the door the opposite side. Press the rubber seal back into the grove on the door. Push the orange marker round to the other side so that you will see at ...
-
Page 15: Electrical Connection
If the mains connection cable is dam- aged, it must only be replaced with a specific mains connection cable of the same type (available from the Miele Customer Service Department). For safety reasons, such replacement may only be carried out by a qualified spe- cialist or the Miele Customer Service Department.