NOTE: Refer to Fig 26–1.
1. Remove the engine from the cart. See page 25.
2. Loosen the four setscrews (12) holding the field (6) to
the clutch housing (2), and pull out the field.
6
Fig 26–1
FIELD & WIRING HARNESS
12
2
Ref 29
3. Pull the plastic caps (B) off the wire screws (33) in
both places on the field. Loosen the screws and re-
lease the wires (29).
4. Pull off the field.
5. Skip ahead to Reassembly, page 28, Step 4.
29
B
33