Replace Mower Belts - Gravely Pro-Turn ZX 48 Operator's Manual

1. Place unit in service position. See
Service Position on page 20.
2. Remove defective relay.
3. Determine cause of relay failure and
repair condition.
4. Install new relay.
Figure 34

REPLACE MOWER BELTS

CAUTION: Damage or worn
belts may result in injury and / or
damage to the unit. Check belts
for excessive wear or cracks of-
ten.
Remove PTO Belt
1. Place unit in service position. See
Service Position on page 20.
2. Position mower deck at lowest cutting
height.
3. Remove hardware securing belt covers to
deck and remove belt covers. See
Figure 35.
CAUTION: Use care when
releasing idler spring tension.
Keep body parts away from
idlers when performing this
operation.
See Figure 36.
4. Slowly remove spring hook from anchor
bolt to release tension from belt idler.
5. Remove PTO belt.
3
4
1. Spring
2. Anchor Bolt
3. PTO Belt
4. PTO Belt Idler
EN - 29
Figure 35
1
Figure 36
2