Dyna-Glo M365GMDG14 Manual page 13

ASSEMBLY INSTRUCTIONS
13. Insert the LP gas cylinder (sold separately)
into the nesting hole located in the bottom
shelf (A) from the back of cart. Adjust gas
cylinder until positioned correctly (allowing the
gas hose to connect to gas cylinder valve).
Hand-tighten the hose & regulator coupling
to the threaded valve of the LP gas cylinder.
Tighten the tank screw until the cylinder is
secured in place inside the nesting hole of
the cart.
Fully Assembled
Front View
Rear View
13
13
Tank Screw
A