Dyna-Glo M365GMDG14 Manual page 11

ASSEMBLY INSTRUCTIONS
9. Insert the grease pan (M) into position by
sliding it into the grill body (I) from the rear
along the rails located just below the underside
of grill body (I).
NOTE: Grease pan (M) MUST be in position
as illustrated below (grease cup support rails
on your left while facing the rear of the grill).
Insert grease cup (N) into position by sliding
it onto the support rails on the bottom side of
grease pan (M).
WARNING: IT IS VERY IMPORTANT TO CHECK
AND ENSURE THAT EACH AND EVERY BURNER
IS FULLY ENGAGED WITH THE ADJACENT VALVE
ORIFICE BEFORE COMPLETING STEP 10.
FAILURE TO DO SO MAY
RESULT IN FIRE OR
EXPLOSION, POSSIBLY
CAUSING SERIOUS
INJURY OR DEATH. REFER TO MAINTENANCE
SECTION INSTRUCTIONS TO PROPERLY CHECK
THE ENGAGEMENT.
10. Place the heat tents (O) into firebox as
illustrated.
9
M
N
10
O
11
I
I