Furuno FMD-3100 Manual page 43

Is the Chart Display set up to meet the minimum requirements of the IMO Standard display
setting?
Light Popup displayed?
Attributes Display set to Text Box as recommended?
Boundaries set for Symbolized?
Four Shades selected as recommended?
Full Light Lines displayed?
Scale MIN displayed?
Shallow Pattern displayed?
Shallow Water Danger selected as recommended?
Unknown displayed?
Accuracy displayed?
Highlight Date Dependent as recommended?
Highlight INFO displayed?
Highlight Document displayed?
Contour Labels displayed?
LAT/LON Grid displayed?
Spot Soundings as recommended?
Submarines Cables and Pipelines displayed?
All Isolated Dangers as recommended displayed?
Magnetic Variation displayed?
Depth Contours displayed?
Seabed displayed?
Tidal displayed?
Natural and Man-made Features displayed?
Port Features displayed?
Miscellaneous displayed?
Important Text displayed?
Names displayed?
Light Description displayed?
Nature of Seabed displayed?
Magnetic Variation and Swept Depth displayed?
Height of Islet or Land Feature displayed?
NtoM displayed?
Others displayed?
It is crucial for the safety of navigation that the Navigator checks all settings in the ECDIS Chart Display, the Chart Alert and
the Look Ahead functions at the beginning of each navigational watch.
When the personalized display settings in Profiles are being used, then a screenshot of each of the personalized Profiles
should be created and the configuration of each Profile should be verified at regular intervals.
Navigation Officer of the watch
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means,
Z:\Training Courses\TST FMD\TST FMD {out of house}\03.17\04 Trainees Manual\Furuno ECDIS Trainee course manual version 4.0
© FURUNO MARITIME TRAINING a part of Furuno Denmark A/S 2016. All rights reserved.
electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of FMT.
Chart Display checked by Master
(If applicable)
YES NO
43