Furuno FMD-3100 Manual page 40

37. Select IMO Standard
38. Select Four Shades
39. Set Boundaries to Symbolized
40. Select Scale MIN
41. Select Shallow Water Dangers
42. Select Highlight Date Dependent
43. Select Contour Labels
44. Select Spot Soundings
45. Select All isolated dangers
46. Select Depth Contours
47. Select Natural and Man-made Features
48. Select Port features
49. Select Miscellaneous
50. Select Important Text
51. Select Other text
52. Save your display in Profile 9
53. Display the Rings on the ECDIS
54. Display the Predictor to 60 seconds
55. Set the Anchor Watch "Drag circle" to 0,3 nm
56. Locate the USB FLASH and reinstall all licenses
57. Locate the Public key button. Display the content.
58. Delete the charts from Australia in the charts database. The Australian charts begin with AU
59. Locate the GB80001
60. Delete the ENC charts from Australia. The Australian charts begins with "AU"
61. Reinstall the ENC charts you just deleted
62. Find a Route plan, and display the charts covering the voyage.
63. Locate the system button and view the Synchronization settings for the system
64. Look at the colour legend to find chart related issues and status.
65. Locate the Auto Load function and install the AIO file from the USB Flash
66. Tick the NtoM AIO – "Preliminary", "Temporary and "No Information" in the menu, so the AIO information's
are displayed on the chart
67. Set the NtoM AIO overlay to ALL
68. Scroll out on the chart to locate an area where a red AIO box appears
69. Right click on the box, select Pick report and read about the (T) or (P) info on present position
70. Right click, open chart legend and locate the T&P button
71. Locate Chart 1
72. Locate the Weather overlay function on the system
73. Load the Weather file from the USB flash over the Strait of Gibraltar
74. Display the Wind overlay for the area
75. Tick the colour and Arrow boxes
76. Tick the Isobar box
77. Run the time-line hour for hour, to see the weather change
78. Locate an interesting area and right click, select Weather info
79. Switch to Wave overlay
© FURUNO MARITIME TRAINING a part of Furuno Denmark A/S 2016. All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, 40
mechanical, photocopying, recording or otherwise, without the prior written permission of FMT.
Z:\Training Courses\TST FMD\TST FMD {out of house}\03.17\04 Trainees Manual\Furuno ECDIS Trainee course manual version 4.0