Replacing A Hard Disk Drive; Replacing An Optical Drive - Lenovo ideacentre 510S Series Hardware Maintenance Manual

Replacing a hard disk drive

Note: For this procedure, it helps to lay the computer flat.
To replace a hard disk drive:
Step 1. Remove the computer cover. Refer to "Removing the computer cover".
Step 2. Remove the front bezel. Refer to "Removing the front bezel".
Step 3. Open the drive bay as show.
Step 4. Remove the four screws that secure the hard disk drive to the drive bay.
Step 5. Disconnect the data and power cables from the hard disk drive.
Step 6. Slide the hard disk drive out of the drive bay.
Step 7. Line up the new hard disk drive with the mounting holes in the drive bay and secure the new
hard disk drive with the four screws.
Step 8. Connect the power and signal cables to the new hard disk drive.
Step 9. Slide the drive bay back to close it.
Step 10. Reattach the front bezel and the computer cover.

Replacing an optical drive

Note: For this procedure, it helps to lay the computer flat,stable surface.
To replace an optical drive:
Step 1. Remove the computer cover. Refer to "Removing the computer cover".
Step 2. Remove the front bezel. Refer to "Removing the front bezel".
30
ideacentre 510S Series Hardware Maintenance Manual
a
d
b
c