General Safety Directions - AGFA DR 400 User Manual

DR 400 (Radiographic wall stand) | Safety Directions | 35

General Safety Directions

WARNING:
Safety is only guaranteed when an Agfa certified field service
engineer has installed the product.
WARNING:
The product must only be installed using released components
and in released configurations.
WARNING:
To avoid risk of electric shock, this equipment must only be
connected to a supply mains with protective earth.
WARNING:
Ionizing radiation can lead to radiation injuries if handled
incorrectly. When radiation is applied, the required protective
measures must be complied with.
WARNING:
The operator must take precautions to protect himself against
dangerous X-ray exposure when using the DR detector in the X-
ray beam path of an X-ray source.
WARNING:
The DR Detector is not intended to be used as a primary barrier
to X-rays. The user is responsible for ensuring the safety of the
operator, bystanders, and the subjects being radiographed.
WARNING:
Operating the equipment when it is faulty includes the risk of
radiological exposure and injury to the patient and to the
operator. Operate the equipment only in safe and fault-free
conditions.
WARNING:
System unavailability due to hardware or software failure. If the
product is used in critical clinical workflows, a backup system
has to be foreseen.
CAUTION:
Strictly observe all warnings, cautions, notes and safety
markings within this document and on the product.
3256C EN 20221124 1627