GMC Hummer EV 2023 Owner's Manual page 35

GMC Hummer EV Owner Manual (GMNA-Localizing-MidEast-16569278) -
2023 - CRC - 1/25/23
weatherstrip on the I-Bar, then align and
fit the horizontal pins into the receivers
on the I-Bar.
6. When aligning the pins and receivers,
make sure the inboard edge of the roof
panel does not come in contact with the
roof seals. Ensure that the inboard edge
is far enough in that it clears the I-Bar
weatherstrip. Ensure that the I-Bar
weatherstrip is lying flush with the
adjacent roof seals before fully engaging
the pins into the receivers. Failure to do
so may damage the weatherstrip or lead
to an improper seal.
Correct Assembly
Incorrect Assembly
Keys, Doors, and Windows
7. Gently lower the outboard edge of the
roof panel. Push the roof panel firmly
downward to engage the vertical pins.
8. Turn the release handles inward so that
they fully latch in the closed position.
It is critical that the handles fully latch.
9. Push and pull the roof panel up and
down, and side to side, to ensure the
roof panel is securely installed.
Maintaining the Roof Panel
When cleaning, removing, and/or storing the
roof panel:
Flush with water to remove dust and dirt,
then dry the panel.
35