GMC Hummer EV 2023 Owner's Manual page 242

GMC Hummer EV Owner Manual (GMNA-Localizing-MidEast-16569278) -
2023 - CRC - 1/25/23
242 Driving and Operating
Energy can still be consumed from the
charging station when the vehicle displays
and indicators show that the battery is fully
charged. This is to ensure the battery is in
optimal temperature operating range to
maximize vehicle range. See Charging 0 111.
To End DC Charging
1. Wait until the charging process has fully
stopped, the DC charge cord is unlocked,
and the charging status indicator is solid
green or off. To stop charging at any
time during the charge process, see To
Stop AC or DC Charging later on in this
section.
If the charge cord does not unlock from
the vehicle charge port after a charge,
contact your dealer.
2. Unplug the DC charge cord from the DC
charge port on the vehicle and close the
dust cover.
3. Close the charge port door by pressing
firmly in the center until it latches.
4. Manually disengage the Electric Parking
Brake (EPB) before driving the vehicle.
Emergency Manual Charge Cord Release
The charging inlet port is equipped with an
emergency manual charge cord release in
the event the charge cord cannot be
released normally while DC charging.
1. Reach around the panel to find the
emergency manual charge cord release.
2. Pull the emergency manual charge cord
release handle. The DC charge cord will
release.
To Stop AC or DC Charging
Controls on the charging station can be used
to stop the charge process at any time.
To stop charging when inside the vehicle,
use the Stop Charge button on the Charging
screen. See Active Charging under
Charging 0 111.