GMC Hummer EV 2023 Owner's Manual page 118

Hide thumbs Also See for GMC Hummer EV 2023:
Table of Contents

Advertisement

GMC Hummer EV Owner Manual (GMNA-Localizing-MidEast-16569278) -
2023 - CRC - 1/25/23
118
Instruments and Controls
/
Switch : Press to open a menu or
select a menu item. Press and hold to reset
values on certain screens.
DIC Info Page Options
The info pages on the DIC can be turned on
or off through the Options menu.
1. Press
to access the instrument cluster
applications.
2. Move
or
through the list of
available applications.
3. Press to select the application, then press
to enter the application menu.
4. Move
or
to move through the list
of possible information displays.
5. Press the
/
switch while an item
is highlighted to select or deselect
that item.
When an item is selected, a checkmark
appears next to it.
DIC Info Pages
The following is the list of all possible DIC
info page displays. Some may not be
available for your particular vehicle. Some
items may not be turned on by default but
can be turned on through the Options app.
See DIC Info Page Options earlier in this
section.
Trip 1 or Trip 2 and Average Efficiency : The
Trip display shows the current distance
traveled, in either kilometers (km) or
miles (mi), since the trip odometer was last
reset.
The Average Efficiency shows the
approximate average kilometers per kilowatt
hour kWh (km/kWh) or miles per kilowatt
hour kWh(mi/kWh). This number is
calculated based on the number of km/kWh
or mi/kWh recorded since the last time this
menu item was reset. This number only
reflects the approximate average electrical
energy economy that the vehicle has at that
moment, and changes as driving conditions
change.
The values can be reset by pressing and
holding the
/
switch while either the
Trip 1 or the Trip 2 display is active.
Timer : The display shows the amount of
time that has passed since the timer was
last reset. To start/stop the timer, press the
/
switch to access the menu while
this display is active. To reset the timer to
zero, press the
/
switch while the
menu for this display is active.
Tire Pressure : Shows the approximate
pressures of all four tires. Tire pressure is
displayed in either kilopascal (kPa) or in
pounds per square inch (psi). If the pressure
is low, the value for that tire is shown in
amber. Pressing and holding the
switch displays a series of alerts for Tire
Manual Learning.
Driver Assistance : If equipped, shows
information for Adaptive Cruise Control
(ACC), Follow Distance, Lane Keep Assist
(LKA) and Forward Collision Alert (FCA).
Trailer Brake : On vehicles with the
Integrated Trailer Brake Control (ITBC)
system, this display appears in the DIC.
TRAILER GAIN shows the trailer gain setting.
This setting can be adjusted from 0.0 to 10.0
with either a trailer connected or
disconnected.
TRAILER OUTPUT shows the power output to
the trailer any time a trailer with electric
brakes is connected. Output is displayed as a
bar graph. Dotted lines may appear in the
OUTPUT display if a trailer is not connected.
/

Advertisement

Table of Contents
loading

Table of Contents