GMC Canyon 2023 Owner's Manual page 279

GMC Canyon Owner Manual (GMNA-Localizing-MidEast-16512225) - 2023 -
CRC - 3/20/23
Rear Position
5. If the flat tire is on the rear, position the
jack under the leaf spring anchor plate
attached to the axle and between the
four fasteners.
There are two designs for the leaf spring
anchor plate. Align the jacking head
flange with the slot inside the front edge
of the anchor plate as shown if your
anchor plate looks like Type 1.
Align the curved face of the jacking head
with the curvature of the anchor plate as
shown if your anchor plate looks like
Type 2. The jacking head flange should
rest just behind the front edge of the
anchor plate.
Before raising the vehicle make sure the
Type 1
jack is positioned so that the rear axle
will rest securely on the jack lift head.
Getting under a vehicle when it is lifted
on a jack is dangerous. If the vehicle slips
off the jack, you could be badly injured
or killed. Never get under a vehicle when
it is supported only by a jack.
Type 2
Vehicle Care 279
Warning