Grandstream Networks GRP26 Series Administration Manual page 58

Custom Softkey (0/3)
Add Custom Softkey
Custom Softkey Layout
Programmable Keys �� Extension Boards Keys (GRP2615 & GRP2650 only)
Extension (1-4) Keys
Auto Provision List Starting Point
More Softkey Display Mode
Menu
Allow Programmable Key
Configuration via LCD.
Show Target Softkey
Idle Screen Settings
Use Long Label
Call Screen Settings
Transfer Mode via Programmable
Keys
Enable Transfer via Non-Transfer
Programmable Keys
When enabled, GUI will still preserve the space if the configured softkey is unable to show.
Disabled by Default.
3 soft keys can be customized to be optional function keys in the Idle screen.
To add the softkey, configure the following :
● Key Mode : Speed dial , DTMF...
● Label : customized label
● Value ( User ID ): The account on which the action will be performed
Configures the Call Status Layout, based on each call status, the enabled softkeys can be
picked from the available ones.
Up to 4 function softkeys can be displayed at one time. If there are more than 4 softkeys, you
can switch the display by pressing the page switch softkey. If there is an "account switch"
softkey, it will be displayed first followed by the configured function keys in sequence.
EXT (1-160):
● Order: Displays the order of Extension keys Configured.
● Mode: Displays the order of Extension keys Configured.
● Account: Sets the account on which the Extension key will be configured.
● Value : Sets the extension of the account chosen.
● Label : Sets a customized name for the specific action chosen.
Programmable Keys �� Advanced Settings
Configures the type of keys that will be used first on the Auto Provision Eventlist BLF feature.
It can be set to either VPK or Extension Boards.
Set to VPK by Default.
Configures how to display more softkey options. It can be set to either Menu or Toggle.
Set to Menu by Default.
Enables/disables Programmable Key configuration via LCD by pressing and holding
MPKs/VPKs.
Enabled by Default.
Configures whether to show Target softkey on LCD screen.
Enabled by Default
If enabled, the VPK label will extend as desired.
Configures the transfer mode to use when pressing the "Transfer" MPK. Choose from Blind
Transfer, Attended Transfer, or New Call.
Set to Blind Transfer by Default.
Configures MPK with type BLF, Speed dial, etc.,to perform as transfer MPK under active call.
Disabled by Default.