Table of Contents
Advertisement
Chapter 5: Center IP/Subnet Mask/Gateway
Obtaining an IP Address
FXO is undergoing a change of the Center IP Addresses (Re-IP). This process may not
be completed by the time of your scheduled installation.
There are three ways to obtain the IP Address information.
1. The best way to obtain the Center IP address is to capture the IP addresses from
the Configuration Page of the devices that are being replaced.
2. Ask the Center Manager prior to your installation for the IP Address from the
Network Map that should be displayed in the center.
3. Launch the PUMA application on the primary DPW.
**Use the same SUBNET MASK and Gateway as the other imageRUNNER
ADVANCE devices in the center.
imagePRESS C750 with imagePRESS Server G100 Configuration and Installation Guide
19
Advertisement
Table of Contents
