Printing Document In Center Of Paper - Canon TM-355 Online Manual

Printing Document in Center of Paper

When you want to position the source document in the middle of the cut sheet and print, or print with even
margins on the right and left in relation to the width of the roll paper, use the Print Centered function.
The print results when setting with Print Centered are as follows. Normally, if Print Centered is set when
printed as in (A), it will be printed as in (B) for cut sheet and (C) for roll paper.
Note
• When setting the magnification using Scale in the
corner of a page is always used as a start point for enlarging or reducing the page. For that reason,
when performing reduced printing, the bottom and right margins of the paper will increase. At this time,
if you place a checkmark next to Print Centered, the top, bottom, left and right margins can all be
printed evenly.
The procedure for printing to the center of the paper is as follows:
1. Select the paper size 1.
From Paper Size, select the size of the paper you want to print.
2. Select Quality & Media from Printer Options 2.
3. Select the media type 3.
For Media Type, select the same paper type loaded in the printer.
If Auto (Use Printer Settings) is selected, the paper configured in printer settings is printed.
4. Select the paper source 4.
For Paper Source, select the setting that matches your purpose.
5. 5. Select Page Processing from Printer Options
6. Selecting Roll Paper Width 6.
If you selected a roll paper for Paper Source, set Roll Paper Width to the width of the roll paper loaded
in the printer.
Page Setup Dialog, a fixed point at the upper left
133