Recycling the Clippings
This machine comes from the factory ready to recycle
grass and leaf clippings back into the lawn. To prepare
the machine to recycle:
•
If the side-discharge chute is on the machine,
remove it and install the side-discharge deflector;
refer to
Removing the Side-Discharge Chute
(page
19).
•
If the grass bag is on the machine, remove it; refer
to
Removing the Grass Bag (page
•
If the rear-discharge plug is not installed, grip it by
the handle, raise the rear deflector, and insert it
into the rear-discharge chute until the latch locks
into place; refer to
Figure 20
1. Rear-discharge plug
18).
Figure
20.
2. Rear deflector
g019812
17