Table of Contents
Advertisement
7. Select the Correct Shape setting and press Enter.
You see the Correct Shape adjustment screen:
8. Use the arrow buttons on the remote control to select the area of the image you want to adjust. Then
press Enter.
Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a
reset screen. Then select Yes.
9. Press the arrow buttons to adjust the image shape as necessary. Press Enter to return to the area
selection screen.
10. Repeat steps 7 and 8 as needed.
11. When you are finished, press Esc.
Note: To save the current image shape, select Save Memory. You can save up to three image
shapes in the projector's memory.
Parent topic:
Image Shape
Related references
Projector Feature Settings - Settings Menu
111
Advertisement
Table of Contents
