Advertisement
Manual lighting
If the burner will not light after several attempts, or if there has been a power outage, the
burners can be manually lit. If you have attempted to light the burner with the ignition,
allow 1 minute for any accumulated gas to dissipate before manually lighting.
1
2
3
4
BURNER USE
Carefully hold a battery operated lighter
near the desired burner.
Push the dial in and turn counterclockwise
to
LITE.
to a flame setting.
When the burner is lit, turn the dial to any
setting between
When you have finished cooking, turn the
dial clockwise back to
If you are using LP gas, there may be
a slight extinction pop or flash at the flame
spreader a few seconds after the burner has
been turned off. This is normal.
Hold the dial at
LITE
(high) and
HI
OFF
before turning
(simmer).
SIM
.
11
Advertisement
