Rear Wheel - Yamaha TT-R50EL 2019 Owner's Manual

Periodic maintenance and adjustment
Tightening torque:
Axle nut:
35 N·m (3.5 kgf·m, 26 lb·ft)
6. Connect the brake cable to the
brake camshaft lever, and then in-
stall the brake lever free play ad-
justing nut on the brake cable.
TIP
If the spring was removed, install it
onto the brake cable with its smaller di-
ameter end facing down.
1
2
1. Brake cable
2. Spring
7. Adjust the brake lever free play.
(See page 7-17.)
8. While applying the front brake,
push down hard on the handlebar
several times to check for proper
fork operation.

Rear wheel

To remove the rear wheel
1. Loosen the axle nut.
2
1
1. Axle nut
2. Washer
3. Drive chain slack adjusting nut
4. Locknut
5. Drive chain puller
2. Remove the brake pedal free play
adjusting nut, and then discon-
nect the brake rod from the brake
camshaft lever.
3
1. Brake pedal free play adjusting nut
2. Brake rod
3. Brake camshaft lever
3. Fully loosen the locknut and drive
chain slack adjusting nut on each
end of the swingarm.
7-31
4
3
5
1
2
EAU25081
EAU56734
7