Table of Contents
Advertisement
Clean the shaver with water or with the
cleaning brush once per month. (See
pages 15 to 17.)
The main unit neck section (a), trimmer,
system outer foil gaps, etc. cannot be
cleaned with the self‑cleaning recharger.
Changing the mode of self-cleaning recharger
The "Charge" mode starts when attaching the shaver,
and the mode can be changed by pressing the
SELECT button.
AUTO mode
Charge mode
(Clean/Dry/
(Charge)
Notes
• Do not press the cleaning liquid unit removal button
during cleaning as the cleaning liquid may spill
causing a malfunction.
• The drying time may increase in an ambient temperature
approximately 15 °C or lower.
The Clean or Dry function may not operate under
extreme low temperatures (approximately 0 °C or lower).
• A lubricant constituent is included in the detergent, so
smooth shave is maintained without applying oil.
ES-LS9A_AUS.indb
15
Dry/Charge
mode
Charge)
(Dry/Charge)
Cleaning thoroughly
Cleaning with water
• Turn the shaver off and disconnect the AC adaptor.
1
Apply some hand soap and
some water to the system
outer foil.
2
Press
for more than
2 seconds to activate the
sonic vibration cleaning
mode.
• Splashing of foam is
suppressed.
• The lamps blink alternately.
• After about 20 seconds, it will be automatically
turned off, or you can turn it off by pressing the
power switch.
3
Remove the outer foil
section and clean with
running water.
• See page 17 for removing
the outer foil section.
• Splashing is reduced by rinsing the shaver in sonic
vibration cleaning mode.
15
2022/08/31
11:19:04
Advertisement
Table of Contents
