Table of Contents
Advertisement
Chapter 4
Common Configuration Questions
Boot Options
Note
There are some limitations when booting from a USB device. Windows XP
can be installed from a USB CD/DVD-ROM, but earlier versions of Windows cannot.
The NI PXIe-8130 BIOS configures the USB devices so that they will work in a DOS
environment.
NI PXIe-8130 User Manual
What devices can I boot from?
The NI PXIe-8130 can boot from the following devices:
•
The internal Serial ATA hard drive (or PATA hard drive for the
NI PXIe-8130 Extended Temperature option)
•
An external SCSI hard drive or USB CD/DVD-ROM if an
SCSI adapter, such as the PXI-8214, is used
•
A network PXE server on the same subnet
•
An external USB mass storage device such as a USB hard drive,
USB CD/DVD-ROM, or USB key
•
An external USB floppy drive
•
Most PCI or PCIe-based devices that provide an Option ROM
How do I configure the controller to boot from these devices?
There are two methods.
•
Enter the BIOS setup by rebooting the controller and pressing
<Delete> during the memory tests. Select the Boot menu. You will see
a list of all bootable devices, ordered by device type. You can set the
boot order by altering the 1
rd
3
Boot Device settings.
•
To boot from a different device without permanently changing the boot
order, press <F10> during POST. After the BIOS completes the POST
and just before the controller boots the OS, the Boot menu is displayed.
You can select the device type you want to boot from.
st
Boot Device, 2
4-2
nd
Boot Device, and
ni.com
Advertisement
Table of Contents
