Video Configuration Submenu; Power/Reset Configuration Submenu; Trigger Router Configuration Submenu - National Instruments NI PXIe-8130 User Manual

Hide thumbs Also See for NI PXIe-8130:
Table of Contents

Advertisement

Chapter 2
Installation and Configuration
NI PXIe-8130 User Manual

Video Configuration Submenu

Use this submenu to apply alternate settings to the video configuration.
Normally, you do not need to modify these settings, as the factory default
settings provide the most compatible and optimal configuration.
Onboard Video Adapter—This setting specifies whether or not the
onboard video adapter is enabled. The default is Enabled.
Primary Graphics Adapter—This setting specifies which video
adapter the BIOS should use as the primary adapter if more than one
is present. To use an external video adapter as the primary graphics
adapter, choose Add-in PCI Video. The default is Onboard Video.

Power/Reset Configuration Submenu

Use this submenu to apply alternate configurations to the power and reset
configuration. Normally, you do not need to modify these settings, as
the factory default settings provide the most compatible and optimal
configuration.
Power Button Instant-Off—This setting specifies the operating
system environments where the PXI Express chassis power button
should instantly power off the system. The controller can be
configured to power off instantly in a non-power managed OS
environment only (corresponding to the Non-PM OS Only setting),
such as LabVIEW RT or DOS. Alternatively, the controller can be
configured to power off instantly in any OS, including Windows. The
default is Non-PM OS Only.
Restore on AC Power Loss—This setting specifies how the controller
should behave after an AC power loss event occurs. The controller can
be configured to Power Off, Power On, or return to the Last State
that it was operating in before power was lost. The default is
Power Off.

Trigger Router Configuration Submenu

Use this submenu to program the front panel trigger router configuration.
Route Front Panel Trigger—This setting specifies how the front
panel SMB trigger should be routed. The front panel trigger can be
routed to System Reset, allowing an external trigger to reset the
system. The default is Disabled.
2-12
ni.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ni pxi-8221Pxi expressPxie-8130

Table of Contents