Table of Contents
Advertisement
22
www.aeg.com
as shown in the next drawing) for
some seconds until the display
shows the default level C04 and the
indicator
water softener is active during
washing only.
4. Touch repeatedly the Spin button
until the desired level appears (from
C01 to C07).
5. Touch the Start/Pause button to
confirm your choice and exit the
menu.
How to set the water softener
also during rinse phase
The factory setting allows to soften the
water during washing phase only. This
setting satisfies most of the use
condition. However, if the inlet water is
particularly hard (C06 and C07 levels),
Water hardness levels
Levels
C01
C02
C03
1)
C04
C05
C06
C07
1) Factory setting, able to satisfy most of the use conditions.
goes on. It means the
Water hardness range
°f
°d
(French de‐
(German de‐
grees)
grees)
≤5
≤3
6 - 13
4 - 7
14 - 21
8 - 11
22 - 29
12 - 16
30 - 37
17 - 20
38 - 45
21 -25
≥46
≥26
we suggest to set the water softener also
during rinsing phase to preserve the
fabric softness.
Once you have entered the menu by
pressing Spin and the Temperature
buttons:
1. Touch the Temperature button. The
goes on.
This setting increases
the salt consumption.
2. Touch the Start/Pause button to
confirm your choice and exit the
menu.
How to deactivate the water
softener
Once you have entered the menu by
pressing Spin and the Temperature
buttons:
1. By touching the Temperature button
twice, the water softener is excluded
completely. The indicator
go off and the
the display.
2. Touch the Start/Pause button to
confirm your choice and exit the
menu.
°e
(English de‐
mmol/l
grees)
≤ 4
≤0.5
5 - 9
0.6 - 1.3
10 -15
1.4 - 2.1
16 - 20
2.2 - 2.9
21 - 26
3.0 - 3.7
27 - 32
3.8 - 4.5
≥33
≥4.6
and
appears in
ppm
≤ 50
60 - 130
140 - 210
220 - 290
300 - 370
380 - 450
≥460
Advertisement
Table of Contents
