Lan; Ipv4 - D-Link DIR-615 User Manual

Wireless n300 router
Hide thumbs Also See for DIR-615:
Table of Contents

Advertisement

DIR-615 Wireless N300 Router
User Manual

LAN

To configure the router's local interface, go to the Connections Setup / LAN page.

IPv4

Go to the IPv4 tab to change IPv4 address, configure the built-in DHCP server, or specify MAC
address and IP address pairs.
Figure 77. Configuring the local interface. The IPv4 tab. The Local IP Address section.
Parameter
IP address
Subnet mask
Device domain name
Figure 78. Configuring the local interface. The IPv4 tab. The Dynamic IP Addresses section.
Local IP Address
The IP address of the router in the local subnet. By default, the
following value is specified: 192.168.0.1.
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
The name of the device attached to its IP address in the local subnet.
Page 90 of 184
Configuring via Web-based Interface
Description

Advertisement

Table of Contents
loading

Table of Contents