Url Filter - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual

URL Filter

On the Firewall / URL Filter page, you can specify restrictions on access to certain web sites.
To enable the URL filter, in the General Settings section, move the Enable switch to the right,
then select the needed mode from the Type drop-down list:
Block listed URLs: when this value is selected, the router blocks access to all addresses
•
specified in the Filters section;
Block all URLs except listed: when this value is selected, the router allows access to
•
addresses specified in the Filters section and blocks access to all other web sites.
Click the APPLY button.
To specify URL addresses to which the selected filtering mode will be applied, in the Filters
section, click the ADD RULE button and enter a relevant address in the displayed line. Then click
the APPLY button.
To remove an address from the list of URL addresses, click the Delete icon ( ) in the line of the
relevant URL address. Then click the APPLY button.
Figure 127. The Firewall / URL Filter page.
Page 158 of 184
Configuring via Web-based Interface