Configuration - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual

Configuration

On the System / Configuration page, you can change the password for the administrator account
used to access the web-based interface of the router and to access the device settings via TELNET,
restore the factory defaults, backup the current configuration, restore the router's configuration from
a previously created file, save the changed settings to the non-volatile memory, reboot the device, or
change the web-based interface language.
In order to change the password for the administrator account, in the User section, enter a new
password in the New password and Password confirmation fields. Click the Show
icon ( ) to display the entered password. Use digits, Latin letters (uppercase and/or lowercase),
and other characters available in the US keyboard layout.
Remember or write down the new password for the administrator account. In case of losing
!
the new password, you can access the settings of the router only after restoring the factory
default settings via the hardware WPS/RESET button. This procedure wipes out all
settings that you have configured for your router.
To change the web-based interface language, select the needed value from the Language drop-
down list.
4 0-9, A-Z, a-z, space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~.
Figure 129. The System / Configuration page.
Page 163 of 184
Configuring via Web-based Interface
4 Then click the SAVE button.