Table of Contents
Advertisement
A battery must be used to retain the mainboard configuration in CMOS
RAM. Short 1-2 pins of JBAT1 to store the CMOS data.
1
Keep Data
Note:
You can clear CMOS by shorting 2-3 pin, while the system is off.
Then, return to 1-2 pin position. Avoid clearing the CMOS while
the system is on, it will damage the mainboard. Always unplug
the power cord from the wall socket.
2
3
2-22
1
3
JBAT1
1
2
3
Clear Data
Advertisement
Table of Contents
