Section 4 - Operation; Front Panel Controls - Miller Maxstar 152 Owner's Manual

4-1. Front Panel Controls

8
1 Amperage Adjustment Control
2 Amperage Control Switch
For front panel control, place switch in Panel
position.
For remote control, make connections to
Remote 14 receptacle, and place switch in
Remote 14 position.
3 Output (Contactor) Switch
OM-172 200 Page 16
SECTION 4 – OPERATION
1
For weld output, place switch in On position.
For remote control, make connections to
Remote 14 receptacle, and place switch in
Remote 14 position.
4 Lift-Arc Switch
For Lift-Arc TIG welding (see Section 4-2)
place switch in On position. Place switch in
2 3 4
7
Off position for other than Lift-Arc TIG
welding.
5 Power On/Off Switch
6 Pilot Light
7 Process Selector Switch
8 Over Temperature Light (CE Models
Only)
5 6
6
Ref. ST-179 381-A