Table of Contents
Advertisement
• BEV unit may only be connected to the models shown in the table below. Do not attempt connection with
other models.
Indoor unit
Wall-mounted type
• See the included installation manuals on the VRV outdoor unit and the indoor unit for details.
• For the indoor unit connected to the BEV unit, cooling/heating cannot be switched over with the remote con-
troller.
• When the ceiling suspended cassette type indoor unit and BEV unit are used for all indoor units, a separate
"Cool/Heat SELECTOR" is needed to enable the cooling/heating switchover.
2-1 PRECAUTIONS
• Do not install or operate the unit in rooms mentioned below.
• Laden with mineral oil, or filled with oil vapor or spray like in kitchens. (Plastic parts may deteriorate which
could eventually cause the unit to fall out of place, or could lead to leaks.)
• Where corrosive gas like sulfurous gas exists. (Copper tubing and brazed spots may corrode, which
could eventually lead to refrigerant leaks.)
• Where exposed to combustible gas and where volatile flammable gas like thinner or gasoline is used.
(Gas in the vicinity of the unit could ignite.)
• Where machines can generate electromagnetic waves. (Control system may malfunction.)
• Where the air contains high levels of salt such as that near the ocean and where voltage fluctuates
greatly such as that in factories.
Also in vehicles or vessels.
• This unit, both indoor and outdoor, is suitable for installation in a commercial and light industrial environment.
If installed as a household appliance it could cause electromagnetic interference.
2-2 ACCESSORIES
Check if the following accessories are included with your unit.
Name
Clamp
Quantity
9 pcs.
(1) 3 short pieces
Shape
(2) 6 long pieces
(8) Installation
Name
manual
Quantity
1 pc.
Shape
2-3 CONBINATION
• Attach a BEV unit with the indoor unit shown in the table below.
BEV unit
Indoor unit
FXAQ20MHV1
English
FXAQ20MHV1, FXAQ25MHV1, FXAQ32MHV1, FXAQ40MHV1, FXAQ50MHV1
Insulation for fitting
3 pcs.
(3) For liquid piping × 2
(4) For gas piping × 1
(9) Nameplate
1 pc.
BEVQ50MVE
FXAQ25MHV1
FXAQ32MHV1
Model
Sealing pad
3 pcs.
(5)
(6)
FXAQ40MHV1
(7) Gas piping
connection piping
1 pc.
Small × 2
× 1
FXAQ50MHV1
3
Advertisement
Table of Contents
