Sony CLIE PEG-TG50 Handbook page 159

Connecting to the Internet by communicating with the Bluetooth compatible
mobile phone
Tips
• The step in which the Passkey Input screen appears varies depending on the
mobile phone, and for some devices, the Passkey input screen does not
appear. In any case, follow the instructions shown on the screen and enter a
Passkey when required.
• Depending on the radio wave conditions, it may take time to complete a
Bluetooth compatible device discovery or establish communication.
• If it takes too long to perform a device discovery, tap Cancel on the discovery
screen, and conduct a discovery again.
• If the device discovery failed in detecting a device, conduct a discovery again.
Note
Enter a Passkey to activate the security. If the security is off, you may be charged
the telephone line rental fee that someone else should pay for a dial-up connection
when you access the Internet from your CLIÉ handheld through a Bluetooth
compatible mobile phone.
2 Setting up the network connection
For details, refer to "Connecting to the Internet" in the "Read This First
(Operating Instructions)."
Connecting to the Internet
1
Turn on the power of the mobile phone and activate
Bluetooth communications.
For detailed operations, refer to the manual of the mobile phone.
2
Start up the appropriate application on the home screen of
your CLIÉ handheld.
3
Start browsing websites, sending or receiving e-mail.
A dial-up connection is executed.
If you cannot connect to the Internet
Tap the arrow V in the top right-hand corner of the Preferences screen,
and select Network.
Tap Connect at the bottom of the screen.
If you still cannot connect to the Internet, perform bonding again for the
Bluetooth compatible device (mobile phone), following the instructions in
"Connecting" on page 156.
Using the Bluetooth™ function
Continued on next page
159