Sony CLIE PEG-TG50 Handbook page 109

Performing a HotSync
(for Bluetooth™ built-in models only)
Tip
If you have renamed a target Bluetooth™ compatible device registered on CLIÉ
handheld, the device may be listed in the previous name when you detect target
Bluetooth™ compatible devices.
In this case, follow the procedure below.
1 Press and hold the Home
Preferences screen (page 69).
2 Tap Disable device name cache from the Options menu.
3 Detect target Bluetooth™ compatible devices.
7
Select a computer you want to register and tap OK.
The Add Trusted Device dialog box is displayed.
8
Tap Yes.
The Bluetooth Security dialog box is displayed on your CLIÉ
handheld.
9
Enter a passkey and tap OK on your CLIÉ handheld.
The Passkey Input dialog box is displayed on the screen of the selected
computer.
Tip
What is a passkey?
A passkey is a secret code entered by a user to enable two Bluetooth compatible
devices to communicate. A user can enter any characters and numbers to create a
passkey.
The same passkey should be entered on both devices to permit communication
between those devices. A user can change a passkey for every communication
session as long as the same one is used for both devices. Once communication is
permitted, the communication between the devices will be available without
entering the passkey for a preset period of time.
10
Enter the same passkey you entered in step 9 on your
computer.
If the name you entered in step 3 is added to the Available
Connections: list, the preparation is complete.
Exchanging and updating data using a HotSync
®
(Other HotSync operations)
®
operation using the Bluetooth™ function
/Menu
button on the Bluetooth
Continued on next page
®
operation 109