Table of Contents
Advertisement
Unscrew all screws usingthe
1.
spanner supplied.
– Remove all transport safety bolts
completely
– take the mains cable out of the
retainers
Positioning and connecting
Insert the protectivecovers..
2.
Notes
Before using the appliance for the
■
first time, make sure that all transport
safety bolts have been removed and
kept safe for any subsequent
transport.
If you need to transport the
■
appliance at alater date, always refit
the transport safetybolts to prevent
damage to the washerdryer.
Installation surface
The appliance must be stable
Note:
aligned so that it does not move
around.
The installation surface must be firm
■
and level.
Soft floors/floor coverings are not
■
suitable.
en
15
Advertisement
Table of Contents
